150929b sub-project_drawing

overview of  it_GH nkwantakese sub project - solar installation as well.

it_GH presentation update

the presentation map for job acquisition was updated and modified......

it_GH examining it to proceed work with it

161112_estimate draft

the pump system for okubi prepared and sent to Emmanuel.(Okubi Hotel)

https://drive.google.com/open?id=1n2I9fcNzAwAZ7AZndIrZzMkmSBdVdSyHrNkZ988oVdI

161112_okubi contract

Okubi requested it-GH to fix a problem with their pumping system sending water to the hotel rooms.
we checked the system and decided to change the pumping system for them

150929b_complete installation with automation

Electrical installation work completed...with automation and solar lighting...

150929b_stores MCB fixing

Fixing continues ....store one ...distribution(MCB) board was fixed....
Also outside fixing with ceiling rose was done...

150929b_mains board fixing

Fixing main switch boards started today...

150929b_accessories fixing

Work started today with fixing of Electrical accessories... That's the light and socket switches...

150929_ accessories purchase

Electrical accessories ; sockets, lamp holders and everything needed for 150929b project purchased to site.

150929b_installation test with sensor lamp

Wiring installation still ongoing....
The hall and kitchen has been done with...The trunking part were covered....
The sensor led lamp was temporarily fixed....
and system half way tested....

150929b_trunking and installation

Trunking works and electrical wiring installation still continues....

it_150929b- passing trunking cables

Today work stated with drawing of cables through the trunking pipes....

begin work for trunking

After window painting...
The trunking works for the electrical wiring ..
Began...
Trunking work still in progress...

solar panel fixing and testing

Today ....
Solar panels installation work is done ....and tested....with lamp and pump....
Actual wiring ...continues on Monday(161009)

panel fixing

Today ....
Solar panels installation work is done ....and tested....with lamp and pump....
Actual wiring ...continues on Monday(161009)

automation and fountain completed_160916

Today.....the 5th day ....
16th of Oct. 2016
Work after all is done and completed....
The automation and fountain work ....

automation installation

Work for the high level tanks(4 polytanks) ,that is the automatic switch control was done successfully left with low level(2 polytanks)...

fountain works

Today fountain work was critically diagnosed and improvised a way to solve for all to work....
* The frog design of the fountain was chiseled out and found that the pumps were broken...
* All cables feeding the fountain were broken and couldn't work...
* A new piping system is now being designed to make found operate again...

material purchase

Today .....
I went to purchase materials for Okubi water automation system.....
Sulley and David started with the fountain works ...
The old pump system was troubleshooted and was bent ....so a new pump was fixed and tested running....
And also the cable for the automation water system was drawn....

Work to be continued on 161004......

electrical material purchase

electrical material purchase

150929_dig channel for bell & light in fetching station

Digging pipe channel to fetching station for the bell and bell switch was done .....
together with Sulley and David....and as well saw work go on with the waste tank.......

160916_Okubi drawing update

I updated the drawing for Okubi hotel water automation system .........
i added a legend to the drawing to make it more understanding to read ........

survey and drawing

1/ today we went to okubi to do actual measurement of length and height to fit in the estimate ....
2. the drawing for the automation system is also prepared.....

location surveying and fountain diagnosis was done by I- Emmanuel. Sulley and David.

Estimate update-gh-it_10916_Okubi

I updated the estimate done for okubi hotel

https://drive.google.com/open?id=0BwUPsWGsMLpBc1lMcF9jVHdRWkE

Estimate for gh-it 160916-Okubi

1/ estimate for the water automation system at okubi hotel done .......
yet to be given to the management for acceptance.\\\\\



https://drive.google.com/open?id=0BwUPsWGsMLpBUEphTllPTlB4cU0

okubi contract aquisition

the preposition of the construction of water automation system and fountain repair for okubi hotel

4 polytsnk on rooftop

location- Abrepo Ashanti

fountain

polytank

150929b_nkwantakese_bell and lamp channel dig

Digging pipe channel to fetching station for the bell and bell switch was done .....
together with Sulley and David....and as well saw work go on with the waste tank.......

fetching notice and fault trace.(*Aug.16.16

Agenda:
fetching notice and fault trace

Time: 12pm
hours used - 1hr
Task :
        I went to paste a A4 sized notice beside the fetching wall indicating time of fetching water and traced a fault identified last time of visit.
Fault detected and diagnosed.

completed work 150330

Date :
5.05.16
Time:
11 am
Task:
1. Automation system for pump complete
2. Plaque fixing
3. Fetching station gutter for water direction passage...
 Job by:
Emmanuel ,Sulley and plasterer....
* all three task done with automation working correctly...
Finished at 6pm....

automation works

automation system for fetching station complete...
 to test the pump and everything worked correctly when tested

Painting & floor casting

Painting works and floor casting for fetching station done....

plumbing works- 160309

plumbing works started for mampong-north fetching station and finished today .....
left with little touch-up to complete project......

tools fixing at office...

David n I fixed tools hanger at office at Kronum ....with Stephen sorting store items on unicentas .....then we tried fixing issues with the desktop computers for training.....

Meeting with PP

I met with PP together with Mustapha ....
PP and I scheduled to meet in Mampong on Tuesday to see work progress on water project at Kyeremfaso.....