BLOG-Overview ... David in Switzerland http://gsep4david.blogspot.ch/ ... Emmanuel in Switzerland http://gsep2.blogspot.com (this BLOG)

Tuesday, September 12, 2017

It_gh 170912 at office

Today ....things were cleared and space prepared for the training school stuff...
Hope for the future....we prepared ...five(5) PCs. ...one as master pc and the four remaining as students pcs......

Friday, September 8, 2017

It_gh 170906

Started with installations on pc....
3 pcs were done ....but autoCAD wasn't able to  install....yet to find out y....

Tuesday, September 5, 2017

It_gh 170904 .....at Nkwantakese

On the Nkwantakese project......Stephen and I went to fix the meter board and passed cable so electricity could be connected to the site....

Tuesday, July 25, 2017

It-gh 170725 Nkwantakese

Work progress still ongoing .....
Now with block laying,
And carpentry works done for waste ....and pillar works done as well...

Friday, July 21, 2017

It-gh 170721 Nkwantakese

Work still ongoing now with concreting floor...
Fixing waste pipes and iron for waste

Wednesday, July 19, 2017

It-gh 170719 Okubi leak

After Nkwantakese....I went to continue Okubi 's water leak and fountain pump...fault as well as fixing new covers for the fuse and a burnt socket outlet  ....
Now everything is fixed and done....

It-gh 170719 Nkwantakese

I did went to check up on the new site .....about how work goes now....

Sunday, July 16, 2017

It-gh 170711/12 mampong

Fixing of solar panels ....and installing a new pump was installed...and everything worked correctly and in operation. ...

It-gh 170715 Okubi

Okubi work continues...
The fault revealed after chiselling some an area ...showed the chiselling is to be done inside the room...so the room is be emptied and work continues. ...
Other room with leakage were found n solved..
AC condenser pipes ouside was passed through and directed through one pipe out....
The pump now for the fountain isn't working...I check as son possible...

It-gh 170706 fencing

Fencing started at Nkwankese....

It-gh 170705 at melcom

We went to melcom to purchase some systems and as well the market for mesh for fencing in Nkwantakese. ...

It-gh 170704 Okubi leak

Okubi reported of a leak of water in their building and I diagnosed them.estimate was done and work starts to fix the problem....
Some of which are solved and some ....needs some of the room to be emptied before proceeding....

Tuesday, July 4, 2017

It-gh 170703

Time : 11:00am
Schedule - Meeting with infratec-gh ....

# Today we had a meeting with P.P to look at the way forward for the project and what to do next .....with the registration as well for infratec-gh. ...

It-gh 170623

Place: Nkwantakese
Time: 08:00am

* borehole hole drilling date .....
All infratec-gh reps were around and PP as well.....

Monday, June 26, 2017

It_gh 170626

Place: Nkwantakese
Time: 08:00am

* pump was fixed today with Kape drill, Stephen and myself.....
And the closing was done as well.....

Friday, May 19, 2017

it-gh 170519 Gratitude


  • time> 19:45pm
  • Place > home,lebanon

➫➬When the idea of culture and knowledge in Switzerland for exchange was born,we only prayed and believe and put in God's hands.we started with application for the visa and we were refused, the help of auntie Ruth and Pierre Petitjean helped so much even though all hope was lost but we never gave up hope, a recess was done and we followed up to the embassy direct and we were finally granted the visa at the last minute.
  I want to express my profound gratitude to Mr and Mrs Ruth Petitjean for their love and initiating our travels. we are so grateful that God made it possible through them for us to travel, also to all who prayed and also hoped that we will surely make it through.
  Secondly, to all who received us in love and warmth, especially auntie Margaret and Verena who welcomed us at the airport. God bless you so much and all the gifts you gave us. To the family and all friends of  auntie Ruth ,Raymond and wife Jasmin,auntie Theres and husband Werner, auntie Lotti and Jeann, Margrit and husband, Ruthly and husband, Regula and family, Ronnie and wife, Christy, Herechnar, Mattias and his office, Mr Haeusler and associates,Pastor Devely, Bishop Floyd, Minister Michael and Carmenda Crews, and all those who had warmth us in love and all I can't remember their names and the school kids..........we love you all..........
  Lastly, I want to thank my newly gottes who has made it possible for me with love to get my bachelors, I love you so much, Irene, Beatrix and Anna.......wow ......God sent us angels on earth to help us...............
In God's time he makes all things beautiful, and so He deserves all the glory........

it-gh 170519 Swiss History


  • time > 10am
  • place > home

Today I want to share a little bit of Switzerland's history, the beautiful country, and the lovely people I visited,the mountains,the city views.
http://history-switzerland.geschichte-schweiz.ch/swiss-history-summary.html.

https://en.wikipedia.org/wiki/History_of_Switzerland

A brief introduction to Swiss history.

The Swiss Confederation was founded in 1291 as a defensive alliance among three cantons.  In succeeding years, other localities joined the original three.  The Swiss Confederation secured its independence from the Holy Roman Empire in 1499.  A constitution of 1848, subsequently modified in 1874, replaced the confederation with a centralised federal government.  Switzerland's sovereignty and neutrality have long been honoured by the major European powers and the country was not involved in either of the two world wars.
The political and economic integration of Europe over the past half century, as well as Switzerland's role in many UN and international organisations, has strengthened Switzerland's ties with its neighbours, however, the country did not officially become a UN member until 2002.  Switzerland remains active in many UN and international organisations but retains a strong commitment to neutrality.
Unlike most of its neighbours, Switzerland is not a member of NATO or the European Union (EU).  However, on 12 December 2008 it implemented the Schengen Agreement in which border controls with other Schengen members were eliminated while at the same those with non-Schengen countries were strengthened.  Switzerland has the Swiss Franc (CHF) as its currency.
http://www.myswissalps.com/aboutswitzerland/culturehistory/historyswitzerland
http://www.myswissalps.com/aboutswitzerland/culturehistory/historyswitzerland
http://basel.all-about-switzerland.info/basel-cityguide-sightseeing-landmarks-museums.html#History
https://www.britannica.com/place/Switzerland/History

Thursday, May 18, 2017

it-gh 170518 Swiss embassy,Ghana


  • time> 9:00am - 11:00am
  • place > Accra Swiss embassy and home
Today after our return from Switzerland we are to report today at the Swiss embassy in Accra, Ghana as was instructed to do on our return. we went and we got our passport stamped to show we truly returned to prevent any visa processing problems in the future ........i came back home and helped my mum prepared fufu with goat meat light soup......hahahaha





Tuesday, May 16, 2017

it gh 170516 back to our homeland Ghana

  • time 7:30am > 21:30pm
  • place > Arisdorf, Basel, ,Amsterdam,Accra
➤ after the packing,we were set to the airport,Euroairport,to board our transit plane to Amsterdam.Auntie Ruth said her goodbye after we had finished our check in. we departed to Shipol,Amsterdam at 10:45am. In about an hour later we got to Shipol and waited for the next transit to Accra, our flight got delayed again and had to change flight and seat numbers again,departed at 15:55pm and got to Accra at 21:30pm, there we met Pierre Petitjean at Kotoka international airport before he also board his plane back home to his lovely wife.......we later waited for our baggages and got home safely by God's grace..........we report then to the embassy on the 18th of May,2017 to present ourselves to them of our return as was the instruction given us......




Monday, May 15, 2017

it-gh 170515 the last supper in Arisdorf Switzerland

  • time : 9:00am - 22:30pm
  • place: at home in Arisdorf
➣ today, waking up, David changed auntie Ruth's tyres and I did a little touch ups at the washroom then we had breakfast together and we all went to pearl shop to buy some electronics.......
after pearl shop we did the rest of our baggage packing and our mum prepared a Racklet for us and it was superb, that on our first taste of it we liked it and never wanted to stop eating it, but we got filled up......😀😀😀
we are leaving our mum with sadness and a lots of thoughts on her mind and heart.....we did the last car wash and gardening for her so sweet.......she couldn't stop her emotions of our departure but to burst out in tears....God is in control....she then prepared us apricot cake for the evening......we will be communicating in heart....


Sunday, May 14, 2017

it-gh 170514 sunday service at Rainach and FTB(Basel) club match view

  •  time: 9:30am - 17:45pm
  •  places - Rainach and Basel football stadium
🔼 Today was our last Sunday in church and we attended it in Rainach, Michelle
church and its the Sunday as well where we still sang our songs from the workshop and it was great how people were enthusiast to worship God. And as a mothers day David and I surprises the mothers with a beautiful song especially to woman of inspiration, Ruth Petitjean, "in his time he makes all things beautiful" and closing, we had a drink up and we said our goodbyes to the lovely people we met and crossed our paths, we say God richly bless them.https://goo.gl/photos/4GPHAq2hrPPxrh7h9



We left for the stadium(st. Jacobs stadium) with it modernistic touch to watch a match between the famous football club(FC Basel) and FC thun.it was fantastic play with both sides ending with a tie, closing.....we met Regula(Diegten football club). and her family.

we got home to rest a little as we wait for Raymond and his Jasmine Petitjean,; they came a we had a drink as well and got to know Jasmine. what a blessed and wonderful family God made us encounter.....bless.

180124..it_gh Mampong

Mampong sensor fix... I went to fix Mampong sensor control switch for the automation system.. . This was due to inaccuracy to sensor level...